Do It Yourself Network

Home staging is the art of preparing your home to be presented before buyers in the most appealing light. Whereas decorating might be considered what you do to make your home most comfortable, home staging is geared towards turning your home into a marketable piece of merchandise. Statistically, when home staging is done right, it will sell a property faster and for a premium. There are many home staging companies available for hire, but if you’re determined to approach home staging yourself, to be your own “director”, this article includes some key DIY tips.

The big, broad philosophy behind homestaging is to maximize your home’s features, while minimizing its flaws. Other key points involve cleanliness, de-personalization and de-clutter, so that potential buyers are invited to easily imagine themselves ( not you, your dog and husband) living in your home.

Take one, is all about the first impression. Your home must make a positive impact on a buyer, and you want to draw them in from start to finish. For prospective buyers, impressions begin as soon as they drive up your driveway. So, you’ll need to focus on your home’s curb appeal and at the very least, tidy up the outside of your house. This means cleaning up the yard, raking leaves, weeding, shoveling snow, sweeping driveways and porches. You should also completely de-clutter your driveway. Even though this may be your own personal light industrial zone, potential buyers don’t want to see items blocking a neutral view of the home, and all it’s spaces. Spaciousness is appealing, and buyers want to be free to imagine how they might use free spaces.

Other to-dos for the exterior of your home include power washing decks and the outside of your home and removing all bottles, garbage and recycling before viewings. Painting your front door an inviting color and accenting the entranceway with potted plants will add to the curb appeal of your home.

Along these lines, it’s important to de-clutter the interior of your home. This may mean having to rent a storage locker as you purge closets and cupboards. Just when you think you’ve edited out enough “‘you’ness”, try editing out some more. Take books off shelves, remove all personal photos or trophies, reduce the numbers of exposed CDs or DVD’s and, fridge magnets, be gone!

Continuing along the lines of paring down, another way to open up space in your home and to create a more appealing and buyer friendly atmosphere is to remove extraneous furniture. Now, although it may not seem extraneous to you, all those extra chairs you have hanging around, and any “extra” things all need to go into storage. Likewise, if the furniture you do have is dated or out of sync with a cohesive sense of suitable decor, you might consider packing it up and renting a few modern, stylish pieces or borrowing a couple of well-chosen pieces of wall art.

Wage war on grime and dirt and smells! Whatever your personal standards of cleanliness, you’ll want to up the anti and scrub even the unnoticed nooks and crannies that you might normally not bother with. Consider hiring a professional cleaning service if you don’t have the time or energy to do this. If you’re a smoker and tend to smoke inside, you’ll want to make a concerted effort to keep your smoking outside for at least a month before you sell. Likewise, you’ll want to have a plan of attack in terms of combating any existing smells and stains. Painting walls with a stain blocking primer can do wonders to remove stains and smells, and the right color choice can boost the value and appeal of a room.

Drippy faucets, cracked tiles or moldy caulking around that bathtub can knock thousands off your home’s price tag. These are projects you can can do yourself or hire a handyman to do. Don’t overlook these small details as they all add up to create the larger picture impression of your home.

Once you’ve rubbed and scrubbed and made your home, not your home anymore, you can go back in and add some fine touches of humanity, creativity and flair. Although a buyer doesn’t want clutter, a totally dead living space won’t appeal to their homing instinct either. Well appointed plants and flowers can bring a great sense of life and freshness to a space. Consider placing some beautiful fresh cut flowers in an attractive vase.

Attending to these sorts of details as you clean, de-clutter, re-organize and re-fresh your living space, can have a huge pay off when it comes to selling your home.

A DIY conservatory is an easy to install system that can transform your home into the dwelling of your dreams. Whether your goal is to add a conservatory to use as a sunroom, garden room, or a wonderful enclosed porch where you can simply relax you’ll find that there is a wide variety of DIY conservatory styles, ensuring that everyone can have the conservatory that best represents their lifestyle while complementing their home’s décor and architectural design.

Some of the most popular DIY conservatory styles include the Victorian, Edwardian, Traditional Lean, Edwardian Double Hipped, Victorian Double Hipped, Pavilion, Gull Wing, and P-Shaped. Victorian Conservatories have distinctive features and rely heavily upon its gothic architectural influence. Edwardian conservatories are revered for their great use of space and design. A Traditional Lean conservatory is also often referred to as a Sun Lounge; it is one of the most popular conservatory styles. It’s important that no matter what style you prefer, that you select a DIY conservatory that offers easy installation, as well as help along the way. It’s also important to make sure that you receive an adequate quote before determining your project and that the quote includes all of the most important information. Your quote should include pricing for bases, roofing, and the conservatory structure.

The base of your conservatory is the foundation for your structure and you must make certain that the base is extremely durable. That’s why the new Xframe has removed much of the complications associated with laying bases and has enable the builder to install his or her DIY conservatory simply and efficiently. In fact, the new Xframe system is so simple that those who have little to no experience can successfully install their own conservatories. For those who are excited about building their own conservatory, yet still a little weary about the technical aspect of the project, the Xframe system provides great results.

It’s also important that when you select a DIY conservatory company, that you select one that offers plenty of assembly and installation assistance. When completing a do-it-yourself project, you can sometimes feel as if you’re alone. Knowing that you can reach the company if you have any inquiries or issues will help make certain that you have the resources and tools readily available should a question arise.

When choosing a DIY conservatory, you will also need to determine how the materials will be shipped and delivered to your address. Will the delivery include shipping to your door? Will there be additional costs? How long does delivery take? Will the shipment include a checklist so that you can verify receipt of all pieces? These are important questions that must be answered before beginning your DIY conservatory project.

Your DIY conservatory may or may not be subject to building regulations. Nonetheless, it is best to double check and ensure that if you need to meet any additional requirements that you do so. A conservatory is a wonderful addition to your home and will reward you with many years of enjoyment

The DIY Poker Table Legs helps those of us who want to make a poker table from scratch. Let us review the DIY Poker Table Legs and find out more about it.

Many of us are interested to make our own poker tables as we are not satisfied with the ones that are available in the market. For such people, individual poker table parts are available in the market. Someone who has the know how can buy the parts and make a poker table as per their own specifications.

We are going to check out DIY Poker Table Legs, which is one of the most important part of the poker table. The DIY Poker Table Legs are stainless steel folding table legs which can be can be easily used for mounting the poker table tops. The stainless steel legs add stability to the table and you can be rest assured that the table would not collapse under the weight of the top.

The DIY Poker Table Legs will fold smoothly inwards to save space in the gameroom. The legs are suitable for tables which are 30″ and 36″ wide. The length of the table needs to be 8ft. This means that the steel legs are good enough for assembling a poker table which is large enough. It can be used in a club as well as in the house. Many of us like to have a small poker room in the house.

For this we do not need to buy an expensive poker table from the market. All we need to do is to get the right tools and the accessories and assemble the table in our backyard garage. This helps us to save precious money and all we have to spend is our time and effort. The stainless steel used is chromed which will prevent the steel from any environmental damage.

When checking out the product at the shop, I found that it was amazingly simple to make the table at home. I used the demo 30″ wide table top and the whole table was ready within 20 minutes. Ofcourse, I have done this thing before also. However, even if you are a novice you can fix it in an hour.

There are guides available which will help you to cruise through the fixture process. The advantage of using the DIY Poker Table Legs is the options that you can get on the table tops. In a shop, you may not get the poker table, which matches your choice exactly. By using parts you can create a designer table and at a lesser cost too.

Now let us check out the price of the DIY Poker Table Legs. The price of the steel legs is around $100. If you are lucky you can get it for as less as $80. This is a good price and if you can get hold of a table top at a cheap price, you can make a cool poker table in your house. I would rate this product 9 out of 10 in its category.

The obvious advantages of the product helps it achieve the high ranking. You can surely buy the DIY Poker Table Legs if you are planning to make a poker table in the house.

DIY driftwood takes time, but it will save you tons of money. Some small pieces cost well over $20. Also, the soak method (minus salt) will work for store bought driftwood. Store bought driftwood is cleaned and has not been soaked. This may lead to tannin’s being leaked into your tank

What you’ll need:
Driftwood, which can be found anywhere. It doesn’t necessarily have to come from the water. You could find it in the woods, as long as it is weathered down and looks unique. Also make sure the wood is not rotting.

BIG soaking container, I use a 15 gal rubber maid container.

Aquarium Salt, I use Doc Wellfish brand. This is used as a natural way of killing bacteria and parasites.

First step, clean off your wood! Make sure all debris and bark are removed from the wood (or it’ll fall off in your tank!). Once complete, boil the water in the BIG pot and add aquarium salt. I use about a tablespoon per gallon. Boil the entire piece for about 2-4 hours depending on your size. If you can only fit half the wood in the pot then you will need to boil the other half.

Once the boil is complete you can transfer your wood into the rubber maid container. Add water until the whole piece of wood is under water (you can also add salt if you want). If the wood does not sink place something on top of it until it does. It’ll sink after a week or two. You’ll notice the water turn into tea-ish color. It is the result of the tannins that are released into the water. If you didn’t soak the wood, the water in your tank would be this color. Tannins are natural and some fishes actually like it because it’ll make them feel more at home. It’ll also affect your PH, I’m not sure about GH or KH. You’ll need to do water changes every other day to clean the water. This may take weeks or months.

When the color of the soak water suffices, you will need to soak your wood for another week without any salt. This will make sure that the wood does not hold any salt that may leak into your tank.

Once soaking is complete wash the wood well and transfers the wood into your tank. Do not keep the wood out of water for a long time or it will float.

Ask people who have completed do-it-yourself projects and they’ll tell you that the projects took at least twice and much time and three times the money they thought they would. The basic reason is that DIYers usually make a lot of mistakes that end up making home improvement projects more expensive and time-consuming.

Here are 10 surefire ways to avoid the top DIY home improvement mistakes in the future and ensure success.

1. Take out the required permits — it’s amazing how many DIYers skip this step. Sure, it takes time, and it means you have to deal with the government, but it’s actually in your best interest to make sure get the required home improvement permits. The folks in the permitting office will make sure the project is done correctly and that you stay safe in the process. Also, for some projects, you’ll need proof that you have a permit or your insurance company won’t cover the improvement. You’ll probably need a permit for any project larger than wallpapering and painting. If you’re unsure, call your local building department and ask.

2. Have all the tools and materials you need available before you start your project — starting a job without the necessary tools and supplies will slow down the job and delay your progress. And make sure you buy quality tools. They’re a wise investment.

3. Prepare the job site for material deliveries — when your suppliers deliver materials, you’ll want to make sure the job site is ready to accept them. You don’t want your materials exposed to the weather while you are working and you want to have a storage area to prevent theft.

4. Don’t skimp on materials — for example, don’t use 1/4-inch drywall for building walls. Use at at least 5/8-inch; and 3/4-inch works well for a good sound barrier. Use 3/4-inch plywood for sub-floors. It creates a much stronger floor.

5. Prepare the walls for painting — clean the walls, sand them and patch any holes before you paint. Use a coat of primer or stain blocker if you’re trying to cover over oil-based paint, stains or peeling paint, or if you’re painting a lighter color over a darker color.

6. Use the correct paint — use flat paint ceilings. Interior paints should have at least an eggshell or satin finish so you can scrub it. For outdoor decks, use a linseed-oil-based stain to drive the pigment into the wood and preserve it.

7. Keep safe while working — you don’t want to end up in the emergency room. Wear safety goggles when using power tools or working with drywall or wood. Wear a hard hat when you’re working under other people on scaffolding, and open some windows when you’re painting or staining, or stripping old finishes off of floors or walls. Don’t wear loose, hanging clothing, especially when using power tools. Wear gloves when carrying wood, metal and rock, or when hammering, and wear a nail or tool pouch to prevent damage to your floors, feet, and pets.

8. Measure twice and cut once — probably the most important rule of any project. If you’re going to make a mistake, make it too long. You can always make something shorter. You can’t make it longer.

9. Know the limits of your abilities — you’re not going to be good at everything. If you don’t have a lot of experience at plumbing or electrical work, for instance, don’t attempt those projects.

10. Don’t start to learn how to do a project on your own house — If you want to learn how to do a project, offer your assistance to a friend who is an experienced DIYer or a contractor. And if you have any question about what you’re doing, make sure you stop and ask.

You probably won’t eliminate all of your DIY home improvement mistakes, but you can surely reduce them with these 10 tips.

Basements can be a major selling point when it comes to real estate. Many people like having a finished basement for many different reasons. For some it is a recreation room where they can set up a pool table or a ping-pong table.

For some it is a storage area, a great place to put things that won’t fit in the attic. For many, however, it is a wasted area that is partly storage, partly a game room, and mostly unused. But, for those of you with a little DIY heating and plumbing knowledge and the ability to get a home remodeling loan, the basement can easily be turned into the best spot in the house.

Why Remodel The Basement?

Most basements in America were not built for much of anything except extra storage space. They are usually left unfinished by the builder with nothing more than a 60-watt light in the middle of a large, open room. The biggest reason to remodel your basement is because of all the useable square footage that it will provide. There is a lot of wasted space in a basement because it was never finished enough to be able to do anything with it. All the other reasons for remodeling come in the form of what you will be able to use the space for.

I think that the best use for a basement is to convert it into an entertaining area. It is very nice to have a place to bring a lot of guests to without worrying about the whole house getting trashed. There is also a lot of benefit as far as noise goes. If the party is always in the basement, the noise will never reach the complaining neighbors! It is also a very unique entertaining experience to have a separate, slightly isolated area for entertaining. And so, the question now is, how can you make a dull, lifeless basement transform into an exciting, vibrant entertainment area? Here are a few basement-finishing ideas to help you out.

Make it warm and inviting

Basements are usually cold and inconvenient, that is why nobody ever goes down into them. Start with a heating and air conditioning upgrade. Run a few heating and air vents throughout the basement so that every section of it stays nice. A wise thing to do would be to allow the basement heat and air to be turned off when no one is using the basement in order to save money. Basement lighting is also quite inadequate most of the time. Run a few wires around and add more light. Be careful when working with electricity, as this is one of the most common causes of residential construction accidents.

Section it off

It isn’t that difficult to add a few walls here and there. Throw up a few walls for a bathroom, add some dividers to separate a kitchen area, and even put a small bedroom to accommodate guests. The addition of a few walls will make the basement much more appealing.

Put in a bathroom

When entertaining, you do not want to have to ask your guests to walk upstairs in order to use the bathroom, especially if you are serving alcoholic beverages, which increase traffic to the restroom exponentially. You also do not want to house guests in your basement and make them travel upstairs in order to brush their teeth or wash their face. A small bathroom, with or without a shower, will be a huge asset. Check out a lot of different bathroom designs in order to find the one that suits your situation. If you will not be sleeping guests in the basement, all you need is a toilet and sink. If you will have people staying in the basement, it would be nice to have a nice shower, sink, toilet, and closet space. Someone with a little DIY plumbing knowledge and an eye for bathroom design can put in a nice bathroom very easily.

Use it often

There is no point in doing anything to a basement if you are not going to do anything in the basement. Once you have put all the time and effort into remodeling, don’t let it gather any dust. But be careful, with a nice finished basement, you may never have a quiet night to yourself ever again!

DIY shed plans are widely available at your local home improvement store, in books and magazines and online. You can buy the shed plans you need on the Internet and actually download free plans so you can have an idea of what is involved in this type of do-it-yourself project. You will get a good idea of what materials you need, how much space you need and most important of all, how much it will cost you to build a shed. You do have to decide what type of shed you want to build because there are many different kinds to choose from.

Look at your budget and figure out how much money you have to spend on this project. You can go with the option of choosing a shed plan that comes with all the materials you need or you can just buy the plans. Then you can purchase the material when you need it so you don’t have to spend a lot of money at one time. If money is an issue, you can sort through the various plans to find one that is not expensive and will give you the extra space you need.

The foundation of the shed is an important factor. It does need to be solid and there are many different types of foundations you can choose from. These include:

- Patio stones. This is the simplest method if you are planning on having a wood floor in your shed. They are great for a shed that is not too large and for areas where the ground is relatively level.

- Cinder Blocks. This is another way of providing a foundation, but are not very good for areas where the ground is soft, they area heavy and provide support, but will sink into soft ground, thereby making your shed to look uneven.

- Super Spikes. If you want to build your shed in an area where one part of the ground needs to be raised, super spikes will save you a lot of work. However, they should not be used in areas that receive frost.

- Concrete Footings.  These are the perfect solution in areas where the ground is uneven or where you need a building permit to build a shed on your property. They should be at least 10 inches in diameter and drilled well below the frost line.

- Concrete Pads. These provide a base from which you can mount your shed walls. If you intend to store heavy loads in the shed, this is the choice you should make.

Always make sure the shed plan you choose has a picture of the finished product. This will help you in your decision because you want something that will look great and match the exterior of your home. You may even be able to find a set of plans that matches your home perfectly.

Now take a look at the level of difficulty of the plans. If you have never built anything like this, you should opt for a simple plan or one that has all the instructions spelled out for you. Check the plans to see how much work will be involved and make a decision about whether or not you think you will be able to do it on your own.

Have you ever wanted to have the capability of seeing who was at your front or back door without actually going to the door and opening it. As part of home security 101 we preach of course that everyone should have a peephole and use it. That is a good first step.

But beyond that is having the capability to actually see who’s there on a cctv setup in your own home.

The idea is relatively easy and is a great way to increase security for your home and help in the prevention of home invasion.

Using a hidden or surveillance and a cctv monitor you can greatly increase protection for your family.

Most home invasions are accomplished by simply getting in thru the front or back door. If you can see who’s there, it will give the homeowner a tremendous advantage.

HERE’S HOW TO DO IT.

Install a surveillance camera over or near your front or back door-or both. Make sure the camera is designed for outdoor use and at least weatherproof. Dome cameras are usually the best for this use. Some have extra protection against vandalism. They are small and inexpensive. Hook your cameras up to your DVR or VCR.

The cameras can be wired or wireless-wired is best for this application.

Then connect a cctv LCD monitor to the DVR or VCR that can be located anywhere in your home. Most monitors can view at least 4 cameras. You can place the monitor near the doors you are watching or further away in a den or family room.

This setup gives you added security for your home and your family. It is relatively inexpensive and very east to set up.

So to find out who’s at your front or back door without going to see who’s there get the equipment, hook it up and rest easy-a real DIY home security system.

Jack Krohn is the author of over 300 articles, 15 websites and the #1 author of Home Security Articles in the country. He owns SECURITY SOLUTIONS a one stop resource that provides solutions and answers for all your self defense and home security problems.

If you are like me, you have a handle on DIY home maintenance and you haven’t called a plumber or an electrician since George Bush Sr. was in the White House. My shop is the envy of every guy in the neighborhood, and I know my way around just about any home repair or remodeling project. So, when my wife asked if we could build a deck on the back of our log home, I didn’t give it a second thought. “A quick trip to the local lumber yard and I’ll have us grilling steaks on our new deck by Sunday, I told my bride.

When she hesitated after hearing my construction estimation, I knew there was more to this request than I had been told, and I was soon enlightened. Thanks to Oprah, or some other TV show I don’t watch, my wife had learned that decks have changed. “Nobody builds decks like they used to”, the newly crowned deck expert told me, “now they use composite materials or Brazilian woods that last forever”, I was informed.

The gauntlet had been laid in front of me; my wife knew more about a construction matter than me. I did what any man will do when challenged in such a manner, I fired-up the Internet and headed for Google. Oprah was not going to lecture to my wife about building decks and construction materials - that was my job.

What began as a simple weekend project had now become a research operation worthy of a government grant. I could never admit this to my wife, or Oprah, but I soon learned that nobody builds decks like they used to. The last deck I built was constructed using those greenish pine pressure-treated boards that oozed some kind of fluid and weighed five times what they should. Sometime during the last century we were told that wood preservative caused cancer and those heavy green boards disappeared from lumber yards.

Alternative choices for decking made of real wood became (and remain) slim. Because of the huge demand and limited supply such wood requires special orders for over-priced lumber that is never “in stock”. To address this market opportunity, composite materials appeared on the scene and are very popular. Maybe I’m just old fashioned, but I like wood and the thought of grilling my steak standing on a plastic deck just rubs me the wrong way.

Fortunately, I discovered that I am not alone in my wood lust and that there are companies who offer a better, natural solution to the decking dilemma. Our choices for decking materials other than composites and pressure-treated ugly boards now include woods from the forests of South America that last for decades… many, many decades. I discovered one such company named Brazilian Wood Depot located in Norcross, Georgia, that imports and distributes several species of premium, real-wood decking.

I contacted the owner, Eric Hoover, and received a cram course on real wood decking alternatives. These are beautiful woods that literally require no maintenance and are more durable than composite decking. What’s better still is that lifetime estimates range from 15 to 100 years depending on the species. You read that correctly - 100 years!

My research uncovered information that I would never have considered prior to that TV virus infecting my wife’s database. As an example, I have never built a deck, fence or other outside project with a preconceived notion of how long it would last. I would use what I thought was the best material for the job and know that in a couple years I would need to paint or stain again.

All wood grays over time and many people like a gray weathered appearance. However, an oil-based sealer will help preserve Brazilian decking and help retain the original color if you desire. Regarding the remarkable lifespan of these woods, the estimates are based on the “Janka hardness rating” (used to determine whether a species is suitable for use as flooring.)

* Cambara - 15 years

* Garapa - 25 years

* Tigerwood - 40 years

* Jatoba - 50 years

* Cumaru - 80 years

* Ipe’ - 100 years

Clearly, weather and the elements play a critical part in how long any material survives outdoors, so we are talking averages here. The life expectancy of a conventional deck surface of pine can be as short as 5 or 6 years unless you think navigating rot fractures and loose boards constitutes a “stable” deck. Redwood from the good old USA will last longer and is an ideal substitute for pressure-treated pine, but it is exorbitantly expensive and almost impossible to obtain.

Most composite decking manufacturers warrant against just about everything but color fading. However, I learned that many people’s experience is that it will begin to sag and discolor after 5 to 8 years. I followed some interesting online forums and blogs and discovered that composite decking has “love it or hate-it” fan clubs, so you will want to do your own research and I’d recommend that you dig deep. Some of the horror stories involving $20,000 deck fiascos could give you nightmares.

Affordability is the ultimate decision maker (unless you’re Oprah). As with all things, the bottom line will usually determine our ultimate choice, but I was in love with the beauty and structural soundness of the Brazilian decking woods I discovered. My cost analysis of using Brazilian hardwood versus pine or composite decking was a surprising exercise. My research results showed that pressure treated pine costs approximately $.80 per linear foot (plf), and although inexpensive, we’re talking about incurring that same expense many times over the lifetime of a house. Composite decking costs range from $2.00 to $4.00 plf, but again we’re looking at a reoccurring expense.

Surprisingly enough, the Brazilian woods, which are the most beautiful and offer the longest lasting solution, cost approximately $2.20 plf. After you factor out maintenance and factor in a projected 15 to 100 year lifespan, this was a no-brainer decision. In addition to being affordable and beautiful, Brazilian decking wood is extremely durable, needs no maintenance, is recyclable and biodegradable. I live in a log home - I really like wood, and I just discovered I could afford what I wanted.

After I shared what I had learned with my construction princess, she acknowledged that I had reclaimed my title as DIY PRO…. but there was one intsy, wincy, tiny little problem. “There’s this gorgeous log home for sale down by the lake just a few miles from here”, she purred. “And it doesn’t have a deck either, so you’ll be able to use everything you’ve learned when we build our new deck on that house after we buy it.” As I turned to slink away, she asked me where I was going. I answered that it was almost time for Oprah’s show and I needed all the help I could get.

Warts are a very common problem. They can also be really expensive if you go to the doctor to have them removed. However, if you ignore them, they can enlarge or spread.

There are a number of over-the-counter wart removal systems and medications. The gels, patches, sticks, and liquids work, but they take forever. Who wants to fool with this every day for 2-6 weeks?

Several wart freezing systems have hit the market in the last couple years. These work, but they’re very expensive ($15 to $25 for about 12 treatments). On a per-wart basis, it’s still cheaper than going to the doctor, since each wart usually requires only 1-2 treatments.

What if I told you that you could slash the cost of treatment to just pennies? Would you be interested?

After doing a little research, I discovered that the freezing systems are simply aerosol propellant. That’s some pretty expensive propellant!

You can get very similar results with a $5 can of compressed air, using these steps:

1. Buy a can of compressed air from an office or computer store. This is sold for blowing dust and debris from computers and electronics.
2. Turn the can upside down, hold a cotton swab in front of the opening, and press the trigger.
3. Hold trigger down until the swab is soaked with propellant.
4. Quickly touch the swab to the wart, and hold for 20-30 seconds.
5. Wart should get smaller or disappear within about two weeks.
6. Retreat after two weeks if necessary.

That’s it, other than a few cautions and warnings:

* NEVER spray can near a flame, lit cigarette, or your face.
* NEVER use near eyes or on eyelids.
* NEVER, NEVER, NEVER inhale fumes from any aerosol product, including compressed air.
* Do not overtreat; more is NOT better. Holding swap on skin too long can cause a bad case of freezer burn and permanent scarring.
* Read instructions and warnings on compressed air can

This procedure is not recommended for moles or keratoses, due to the fact that they can be cancerous or pre-cancerous. See your dermatologist for these.

Here’s another DIY wart treatment: Duct tape. Cover the wart with duct tape for six days, then soak the foot in water and rub the wart with an emery board or pumice stone. Repeat the process for a couple of months until the wart goes away. Some believe this irritates the wart and surrounding skin, prompting the body’s immune system to attack.